5 main composting machines

With the increasing demand for soil improvement and coping with the rising fertilizer prices, the organic compost market has broad prospects, and more and more large and medium-sized farms choose to process livestock manure into organic compost for sale. The most important link in the organic compost production process is the fermentation of organic raw materials. During the fermentation process, the raw materials need to be turned and thrown so that the intermediate materials can fully contact the air for fermentation and decomposing and removal of moisture. Due to the large-scale production, the processing capacity of organic raw materials is very large, and it is unrealistic to perform manual flipping, which requires the use of flipping equipment. There are many types of flipping equipment on the market, and it is difficult to choose a suitable flipping equipment. This article briefly describes the common flipping equipment and usage scenarios on the market.

 

1. Trough turning and polishing machine

It is necessary to build a fermentation tank, and with the help of a mobile car, it can work in turn among multiple fermentation tanks, reducing investment.

The throwing depth is 0.8-1.8 meters, and the width is 3-6 meters.

It can move forward 1-2 meters per minute, and the walking speed depends on the density of the material. The higher the density, the slower the walking speed.

Applicable scenarios: The daily processing capacity of organic raw materials is more than 20 tons, and the annual output of organic compost is 6,000 tons. There is no need to take up manpower during the operation of the turning machine.

 

2. Roulette Turner

The roulette type turning machine is divided into single roulette and double roulette. Double roulette means that two roulettes work together, which is more efficient.

The requirements for the workshop are high, the wall should be firm, and the indoor operation should be carried out.

The span of turning and throwing can reach 33 meters wide and the depth can reach 1.5-3 meters, which is suitable for deep turning operations.

Applicable scenarios: The daily processing capacity of organic raw materials is more than 30 tons, and the annual output of organic compost is 10,000-20,000 tons. The turning and throwing machine works automatically without taking up manpower.

 

3. Chain Plate Turner

It is necessary to build a fermentation tank, which can work in turn among several fermentation tanks with the help of mobile vehicles.

The walking speed is fast, the throwing depth can reach 2 meters, and it is suitable for deep groove operations.

Equipped with a shifting machine to change grooves, one turning machine can realize multi-groove operation, saving investment.

Since the flipping plate is inclined, after each flipping, the material will move forward as a whole. The next time you stack materials, you can put them directly behind the site.

Applicable scenarios: The fermentation site is small, the fermentation tank is relatively deep, the daily processing capacity of organic raw materials is more than 30 tons, and the annual output of organic compost is 10,000-20,000 tons. The turning and throwing machine works automatically without taking up manpower.

 

4. Self propelled Compost Turner

Compost turners are divided into wheel compost turner and crawler compost turner, which can adapt to different working environments and materials. 

No need to build a trough, just compost the manure into strips. The turning spacing is 0.8-1 meters, and the turning height is 0.6-2.5 meters, which saves investment costs and facilitates expansion.

There is a cockpit on the tipping machine, and workers can isolate part of the odor when operating the machine.

Applicable scenarios: The daily processing capacity of organic raw materials is more than 5 tons, and the annual output of organic compost is 3,000 tons. When the turning machine is working, a worker is required to operate the machine.

 

5. Walking pile turner

No need to build a trough, just compost the manure into strips. It can save civil construction projects, save space, save investment costs, and facilitate expansion.

Usage scenario: It is suitable for farms that handle 3-4 tons of raw materials per day. When the turning machine is working, a worker is required to operate the machine.

 
If you have any other questions or needs, please contact us by the following ways:
whatsapp: +86 13822531567
Email: sale@tagrm.com


Post time: Jun-24-2022